MAIN APPLICATIONS
Medium-high pressure hydraulic lines with installation constraints, pilot lines, return, drain, and suction lines
CONTINUOUS SERVICE TEMPERATURE RANGE
-40°F / +212°F
-40°C / +100°C
MAX. OPERATING TEMPERATURE
(Intermittent service) 257°F / 125°C
RECOMMENDED FLUIDS
Mineral oils , vegetable and synthetic ester-based oils
(up to 212°F I 100°C), glycols and polyglycols, mineral oils in aqueous emulsion, water
TUBE: Synthetic rubber
REINFORCEMENT: One wire braid (DN 6+25), Two wire braids (DN 16+25)
COVER: High abrasion resistant synthetic rubber
APPLICABLE SPECS: ISO 18752 Grade A, SAE J517 Type 100 R17, ISO 11237 R17
TYPE APPROVALS: MSHA, GOST-R
KEY PERFORMANCE
Extreme abrasion resistance • Approved at 200.000 impulse cycles, 133% WP at T=100°C (ISO 18752 Grade A) • Very low bend radius to suit restricted space installtions • High robust and compact hose structure compared to rated pressure • High environmental agents resistance • Vacuum resistance according to SAE 100R4 requirements
|
|
|
|
|
|
|
|
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PART REF. | HOSE SIZE | R.O.D. | O.D. | MAX W.P. | BURST PRESSURE |
MIN. BEND RADIUS |
WEIGHT | MF3000 FITTING |
MF2000 FITTING |
||||||||
| DN | dash | inch | mm | inch | mm | inch | bar | psi | bar | psi | mm | inch | g/m | lb/ft | |||
| Gl21-04 | 6 | -4 | 1/4″ | 10.2 | 0.40 | 12.0 | 0.47 | 210 | 3040 | 840 | 12180 | 50 | 1.97 | 180 | 0.12 | OPF-04 | MF+M03400-04 |
| Gl21-05 | 8 | -5 | 5/16″ | 11.5 | 0.45 | 13.6 | 0.54 | 210 | 3040 | 840 | 12180 | 55 | 2.17 | 210 | 0.14 | OPF-05 | MF+M03400-05 |
| Gl21-06 | 10 | -6 | 3/8″ | 14.45 | 0.57 | 16.2 | 0.64 | 210 | 3040 | 840 | 12180 | 65 | 2.56 | 300 | 0.20 | OPF-06 | MF+M03400-06 |
| Gl21-08 | 12 | -8 | 1/2″ | 17.9 | 0.70 | 19.7 | 0.78 | 210 | 3040 | 840 | 12180 | 90 | 3.54 | 415 | 0.28 | OPF-08 | MF+M03400-08 |
| Gl21-10 | 16 | -10 | 5/8″ | 22.2 | 0.87 | 24.0 | 0.94 | 210 | 3040 | 840 | 12180 | 100 | 3.94 | 620 | 0.42 | OPF-10 | MF+M03400-10 |
| Gl21-12 | 19 | -12 | 3/4″ | 25.6 | 1.01 | 27.7 | 1.09 | 210 | 3040 | 840 | 12180 | 120 | 4.72 | 780 | 0.52 | OPF-12 | MF+M03400-12 |
| Gl21-16 | 25 | -16 | 1″ | 33.0 | 1.30 | 35.2 | 1.39 | 210 | 3040 | 840 | 12180 | 150 | 5.91 | 1120 | 0.75 | OPF-16 | MF+M03400-16 |