MAIN APPLICATIONS
High pressure power lines for general hydraulics, designed for forestry machines booms and harvester heads, harsh environments and severe abrasions
CONTINUOUS SERVICE TEMPERATURE RANGE
-50°F / +250°F
-46°C / +121°C
RECOMMENDED FLUIDS
Mineral oils , vegetable oils and synthetic ester-based oils
(up to 212°F I 100°C), glycols and polyglycols , mineral oils in aqueous emulsion , water
TUBE: Oil resistant synthetic rubber
REINFORCEMENT: Four high tensile steel spirals
COVER: Composite cover with textile reinforcement, realized with high abrasion and ozone resistant synthetic rubber
APPLICABLE SPECS: ISO 18752-C
TYPE APPROVALS: CU-TR; MSHA
KEY PERFORMANCE
Extreme high abrasion resistance • Long life before reinforcement scratching • Special composite cover layer with textile reinforcement for the maximum resistance in harsh environments • Reduced bend radius • Good flexibility in the whole temperature range • Easy mounting in any installation • High impulse resistance according to ISO 18752 requirments
 |
 |
 |
 |
 |
 |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PART REF. | HOSE SIZE | R.O.D. | O.D. | MAX W.P. | BURST PRESSURE |
MIN. BEND RADIUS |
WEIGHT | FITTINGS | |||||||||
| DN | dash | inch | mm | inch | mm | inch | bar | psi | bar | psi | mm | inch | g/m | lb/ft | Std1 | Std2 | |
| FM42-12 | 19 | -12 | 3/4″ | 27.7 | 1.09 | 31.9 | 1.26 | 420 | 6090 | 1680 | 24360 | 150 | 5.91 | 1331 | 0.89 | IP+M01500-12 | |
| FM42-16 | 25 | -16 | 1″ | 34.8 | 1.37 | 39.0 | 1.54 | 420 | 6090 | 1680 | 24360 | 210 | 8.27 | 1970 | 1.32 | IP+M01500-16 | |